The right power for every project.
Switch easily between the blue diode laser (10W or 20W), the 3W infrared laser, and the inkjet module for a workflow tailored to your needs. M2 adapts to every creative idea.
Versatile accessories
to make creating easier
Product Introduction
Specifications
FAQ
Thailand:
M2 10W orders are expected to be shipped within 5 business days.
M2 20W models require 15 business days for shipping.
Philippines, Singapore, and Malaysia:
ship within 7 business days.
The inkjet module works best on fabric, wood, paper, and other similar porous surfaces. It cannot print directly on very dense or smooth surfaces such as metal, glass, or ceramic, because the ink cannot properly penetrate or adhere. Printing on these materials requires a suitable primer or adhesion coating applied in advance.
Ink yield depends on how often you use it. Based on ISO/IEC 24712 standards (5% coverage), one cartridge can print approximately 400 pages.
To extend cartridge life:
- Adjust the ink density based on the material type.
- Always replace the cap after use.
Replacement: Cartridges are not refillable. Please purchase a new cartridge and follow the replacement instructions in the user manual.
No. Thanks to the M2’s side laser projection, you can engrave objects from 0 to 100 mm thick—such as insulated tumblers, balls, or rings—without any riser base.
If you use the laser function regularly, an air purifier can greatly improve your indoor experience. We recommend the SafetyPro™ AP2 Air Purifier: designed for indoor use, it effectively filters the air and helps remove odors.
Already have an xTool desktop air purifier? Contact us to get a free adapter.
To disperse laser energy and reduce yellowing on the edges:
- Use a metal honeycomb panel.
- Or make a hollow wooden support to minimize contact between the paper and the working area.
These methods provide effective heat dissipation and help reduce charring marks.
No. The M2 has a built-in air pump (air assist), delivering cut quality comparable to an external system. You can adjust the airflow strength based on your engraving or cutting needs.
Note: Since the M2 does not include an external air port, connecting a third-party pump is not supported.